Home > Service > Frenquently ask question
Frenquently ask question
  • Time:2015/08/25DSC 971 error messages

    During processing, if the machine encounters a problem, an error message will be displayed. The machine spindle will then be raised to its safety height.  Press “ESC” key to go to the main menu to find out the problem and restart the job.  The machine must be restarted by turning it off and then on.

    Error 1:System error

    Error 2:Job buffer empty  

     
    Error 3X out of range.
    In the file, the X is larger than the machine size.

    Error 4Y out of range.
    In the file, the Y is larger than the machine size.

    Error 5Z out of range.
    In the file, the Z is larger than the machine size.

    Error 6code buffer empty

    Error 7: File Error

    Error 8:Code error oxff

     

    Error 9:System error please restart 

    Error 10:System error please restart feedrate overflow

  • Time:2015/08/25DSC-971 warning messages

       DSC-971 WARNING MESSAGES

      

    1. No Job File

    2. Open File Error

    3. No USB Disk

    4. Sensor Error

    5. File Has Changed

    6. Job Completed

    7. Line Out Of Range

    8. File Error

    9. Write Memory Error

    10. Memory Id Error

    11. Verifying Ok

    12. Verifying Failed

    13.Verifying

    14. Memory Overflow

    15. File Type Error

    16.Ok Restart

    17.Failed Contact Us

    18. Z Out Of Range

     

     

  • Time:2015/08/25DSC-931 error messages

    During processing, if the machine encounters a problem, an error message will be displayed. The machine spindle will then be raised to its safety height. Press “ESC” key to go to the main menu to find out the problem and restart the job. The machine must be restarted by turning it off and then on.
     

    5.1 Errors
    Error 1: System Error. Please contact ROC-Mese.
    Error 2: Job Buffer Empty. The job is empty.
    Error 3 X out of range.
    Error 4Y out of range
    Error 5Z out of range
    Error 6: Code Buffer Empty
    Error 7: File Error
    The file has no data or the job is empty.
    Reason 1The code is incorrect in the file.
    Reason 2The speed is too fast, the feed rate speed must be lowered. Restart the job after
    this.
    Error 8: Code Error Oxff
    Inside the file, some of the code is incorrect.
    Reason 1The original file had errors in the code.
    Reason 2USB Disk has a virus and has corrupted the file. The USB disk must be
    reformatted and the files must be recopied.
    Reason 3Internal memory chips have a problem. Main board must be changed.
    Error 9: System Error Please Restart
    Error 10: System Error (Feed rate Overflow

     

菲律宾杰克棋牌手机版 内蒙古11选5怎么兑换奖金 融易富配资 3d三毛图库好运彩 广西快三开奖结果查询一定牛 河南22选5三复式 广东快乐十分助手开奖 福彩3d最聪明的玩法 天津11选五开奖号 在线配资d精准亿配资 重庆百变王牌100期走势图